MIDI Forum

This forum is the best place to make suggestions :)However, I recommend that if you have a product that you should become a Corporate member so that y...

Try here:/p>

Mime Type is registered please see

Interesting question... Ideally for each UMP connection (or MIDI 1.0 Port) MIDI Message Report Should really be sent to one Device at a time. It is ...

Just letting you know that you post was approved - but as a first post you can't post links (yay spammers). Please add to this post with the link.

YEs the mime type for this is currently being registered. It is taking a little while, but it is in progress 🙂

Isaac do you have an email I can reach you on?

The MIDI Association has only released one Profile so far, the Default Controller Mapping Profile. There are quite a few Profiles in development that...

[quotePost id=18814]Hello Andrew! Can you also bring up my melisma questions to the Working Group -- they're different from Atsushi's point 4 above. S...

The MIDI Association is made up of members. Any member can bring their contributions to the other members where once it goes through the process it ca...

Hi I'll try to answer as best I can 🙂 1. On Utility messages, there are Figure 32 for Examples of JR Timestamps and Figure 35 for Examples of Delt...

Yes! There is work within the Property Exchange Working Group on this functionality 🙂 Unfortunately, at this stage, there are no time frames on when...

I'd be curious to know what issues you had with ipMIDI and RTPMIDI? And what kind of set-up you are running 🙂

Interesting that you raise this. While not going into specifics of upcoming work in the MIDI 2 specifications, there is discussion about some similar ...

Profile and Property Exchange (both in the MIDI 2.0 Ecosystem) can quite happily run over SysEx on the MIDI 1.0 Protocol. So a device could add the...