Notifications
Clear all
Topic starter
Hola!
Estoy intentando secuenciar un Novation KS Rack con un Akai MPC 1000.
Cuando inserto varias secuencias con una performance hecha desde el KS, al cambiar de secuencia en MPC, no me respeta los cambios que he hecho en el sintetizador en esa performance.
Tiene que ser un problema de mensajes midi de cambio de programa.
Estoy haciendo cambios en los bancos lsb y msb pero no doy con ello.
Los listados midi cc no los entiendo muy bien.
Podríais decirme que código de banco son para hacer cambios de programa?
Gracias!
Posted : 19/10/2017 1:20 pm
Hello,
I'm not familiar with either device you mention.
However, please note that many different devices use lsb and msb control changes to select banks and patches, the BIG problem is that they do not all use exactly the same method, so CC instructions that work on one device may not work on another. I recently looked at something relating to a Roland SC device, and I noted that it was slightly different to my Yamaha MU90r, even though many of the sounds were similar.
The only way I think you can get around this is to set different devices to receive midi on different channels, and make sure you send the right Bank Select commands on the correct channel, so that one device will not receive commands intended for the other device.
Geoff
Posted : 19/10/2017 4:00 pm
Topic starter
Muchas gracias Geoff!
Posted : 19/10/2017 10:13 pm
Here's a link to a page from the KS Rack owners manual that explains how it responds to MIDI messages in performance mode and how to use the MIDI Bank Select message to select a Performance:
https://www.manualslib.com/manual/300838/Novation-Ks-Rack.html?page=56
Forum Admin
Posted : 26/10/2017 11:20 am
