fbpx
Skip to main content

MIDI Forum

MIDI 2 per-note pit...
 
Notifications
Clear all

MIDI 2 per-note pitch bend range ?

7 Posts
2 Users
0 Reactions
15.5 K Views
Giel
 Giel
Posts: 20
Eminent Member
Topic starter
 

I assume RPN 0 still sets the channel pitch bend range, just like it did in MIDI 1.
But what about the range for MIDI 2 per-note pitch bend? Can it be different from the channel pitch bend range?

MPE typically uses +/-2 semitones for the channel and +/-48 semitones for the notes. Moving from MPE to MIDI 2 or vice versa would be challenging if this can't be done in MIDI 2.

 
Posted : 11/09/2020 3:30 am
Mike Kent
Posts: 86
Trusted Member
 

The MIDI Manufacturers Association is currently in the process of writing a specification for an RPN (or similar) to set the Sensitivity (range) of Per-Note Pitch Bend.

Chair of MIDI 2.0 Working Group

 
Posted : 12/09/2020 10:45 am
Giel
 Giel
Posts: 20
Eminent Member
Topic starter
 

Great, that would solve the problem 🙂

 
Posted : 13/09/2020 10:10 am
Giel
 Giel
Posts: 20
Eminent Member
Topic starter
 

Any news on this?

AU plugins support the MIDI 2.0 protocol since last fall (macOS and iOS). CLAP plugins support it too.

There's a need for:
- an RPN for per-note pitch bend range, similar to RPN 0.
- a default value for the per-note pitch bend range. MPE defaults to 48 semitones, it would make sense to copy that.

IMHO the MMA should specify this before people invent their own specs.

 
Posted : 03/07/2022 2:02 pm
Mike Kent
Posts: 86
Trusted Member
 

The specification has been finished. The document is only available to paid corporate members of the MIDI Association at the moment. It is ow going through the final procedures necessary to adopt and publish the document.

Mike.

Chair of MIDI 2.0 Working Group

 
Posted : 05/07/2022 9:04 pm
Giel
 Giel
Posts: 20
Eminent Member
Topic starter
 

OK, thanks. I look forward to its public release.

 
Posted : 06/07/2022 7:53 am
Giel
 Giel
Posts: 20
Eminent Member
Topic starter
 

RPN 7 has arrived 🙂
Thanks

 
Posted : 16/06/2023 10:02 am
Share: