MIDI Forum

>Can we write real time message into a midi file? The specification for Standard MIDI Files includes a way to store a real-time message in a MIDI f...

It sounds like something may be sending a Start message to the Yamaha DD-12. The MIDI Implementation Chart on page 17 of the manual says the DD-12 ...

I looked at the Roland M-OC1 manuals available on this page: Roland Manual Archive. It looks like the Vol&Hold setting needs to be either "on" or "vol...

> channels 1, 11-16 do not work. I get the impression that your E-15 is operating in its normal mode because the first MIDI implementation chart in...

I looked at the Roland E-15 manual available on this page: Roland Manual Archive. The end of the manual has two MIDI implementation charts: 1. The ...

I found a description of the Transpose Setup option in Cubase that might do what you want. It sounds like you might be able to do the following: Se...

I assume that the same formula works for the 2bytes octave /scale. No, the ss tt values in the "Scale/Octave Tuning 2-Byte Form" are different fro...

Also, I just noticed, on the page The Complete MIDI 1.0 Detailed Specification, scroll down to the section "MIDI 1.0 Specification Addenda [after 1996...

Just to make sure you and everyone else reading this is aware, the official MIDI Tuning Standard description is part of The Complete MIDI 1.0 Detailed...

The MIDI Solutions Footswitch Controller can be programmed to do this. You have to program by sending it System Exclusive messages, but it retains its...

Div's MIDI Utilities is a collection of command line MIDI programs. The program called brainstorm sounds like it does some of the things you want: ...

Geoff: Be aware that a making a recording into a MIDI file usually won't record most System Real-Time or System Common messages (status bytes from hex...

The Standard MIDI File specification allows you to store MIDI clock messages in the F7 "escape" or "continuation" form of the sysex event. To check if...

I just read over the spec, and I also feel that example is wrong. Also note, your reverse calculation should be 440*(2^(( 0.0061/100 - 69)/12)) ...

My previous post explained how to fix the issue, but didn't really explain how to investigate these kinds of problems. When you have a MIDI file th...