MIDI Forum

I think this is to reference the MIDI clocks as a tempo. Tempo is most often the number of quarter notes in a minute. Then in standard notation of a 4...

> When we have virtual MIDI 2.0 drivers that we can use for inter-application MIDI, will these drivers be able to sync to the same rate as the audio i...

I built a 1 input to 2 output switcher using 3 jacks and a little switch. I can use it with 1 input and select between 2 outputs, select between 2 inp...

There is a "Join the MMA" link at the bottom of this page.

The MIDI Manufacturers Association is embarking on a developing new version of, extension to, or replacement for the Standard MIDI File. The primary t...

>all Protocol Negotiation messages will probably be used in the UMP forma > >Though the spec on p.3 states: >Devices default to using MIDI 1.0 and ...

We chose to document all System Exclusive messages in their MIDI 1.0 format just to be consistent. The format in the Universal MIDI Packet removes the...

> 1. In Control Change message,... > 2. ...just translate current Control Changes #0-127 into some reserved bank of Registered Controllers... We c...

I have been too busy in the last few weeks to come back to this thread. I apologize. But the core MIDI 2.0 specifications are now publicly available a...

MIDI 2.0 uses a Universal MIDI Packet (UMP) format for MIDI 1.0 Protocol messages and MIDI 2.0 Protocol messages. There is a Version 2 of the USB Dev...

Your experience might not be USB specific. Some USB MIDI devices have much better timing than others. it could be the devices you are using, not USB i...