I try to control Roland GR-55 (guitar synth+modelling) wha with behringer FCB1010 MIDI foot controller expression pedal, and wonder if it could be done? I already managed to control the volume on GR-55 with FCB1010. Is it something with 7-bit and 14-bit, or was that with pitch bend (in a post long ago on this forum)?
To use the FCB 1010 with the GR55 in default mode - ie midi setting "FIX" not "PRG" - the patches in the GR55 can be selected in the same way using the software editor and uploading settings via midi to the FCB1010.
I have made a list of the default sounds in the GR55 after the latest firmware upgrade - (1.50) - the patches are listed in groups of 3 (as per the pedals on the GR55) and listed under User/Lead/Rythym/Other showing the Bank and Program Change number for each patch. The only editable Patches are those saved in the User banks.
I have made a list of the default sounds in the GR55 after the latest firmware upgrade - (1.50) - the patches are listed in groups of 3 (as per the pedals on the GR55) and listed under User/Lead/Rythym/Other showing the Bank and Program Change number for each patch. The only editable Patches are those saved in the User banks.
- Page :
- 1
There are no replies made for this post yet.